|
J-Max Revolver Lasers
J-Max for Smith & Wesson J-Frame Revolvers
LMS-JMX-NH for most round butt, fully enclosed hammer J-frame styles
LMS-JMX-H for most round butt, exposed or shrouded hammer J-frame styles
Shoot Better, Every Time!
Enhances shooting accuracy with S&W J-frame revolvers. Adjustable windage and elevation settings for precise alignment.
Better by Design!
We have the laser in the right place! Positioned high along the bore line for maximum shooting accuracy, you never have to worry about blocking the beam with the LaserMax J-Max laser. Your trigger finger is along the frame until you are ready to shoot, in keeping with firearms safety training.
Don’t give yourself away!
Touch buttons on either side of the grip give you the on/off control - highly desired in a tactical or personal defense situation!
Select your mode!
Choose from Hi-Vis pulsating beam or continuous wave (constant on) beam. Highest laser power output commercially available, 635 nm red-orange laser.
Turn it on!
The J-Max can be activated from either side. Press the button once and  the laser activates,
press it again and it turns off. Firing grip is maintained while turning laser on/off
- for maximum accuracy!
Feel the difference!
Recoil absorbing Santoprene® grips with low profile design contoured to your hand. Handy compartments for your alignment tool and a spare set of batteries, too! Battery changes will not change alignment!
The choice is clear! Compare!
| | NEW! LaserMax J-Max | The Competitor | | Location of Laser |
Where it should be! High along the bore, away from trigger finger; trigger finger will not block beam when aiming
| Low; behind trigger finger; beam obstructed when aiming | | Laser Activation |
Activation from either side, press button once to activate laser, press again to deactivate; will not create accidental light – important in a tactical situation
| Squeeze-switch in grip | | Master Switch | Yes (of course) | No | | Battery Change | Laser stays aligned through battery change; no need to re-zero |
Requires going back to range to re-zero after each battery change (laser detaches when you change batteries)
| | Battery Type | 357 Silver Oxide (2) | 2032 Lithium (2) | | Battery Life | 3.5 hours | 4 hours | | Extra Features |
Automatic time-out after 30 minutes of continuous run-time (toggle once to reactivate)
| None | | Spare Batteries |
Compartment under grip for spare batteries
| None | | Spare alignment tool for windage/elevation |
Spare tool under grip (a total of two tools provided)
| None | | Beam Selection |
User can select Hi-Vis pulsating or constant-on by switch under grip
| Constant-on only | | Cleaning |
Sapphire window is easily accessed with tissue, cloth or swab
| Recessed; swab required | | MSRP | $219 | $299 | LMS-JMX-NH
(non-hammered) | Buy Now | -- | | LMS-JMX-H (hammered) | Buy Now | -- |
|
Choose a model:
|
You have no items in your cart.
|
|
All LaserMax products are designed and manufactured in the USA
|
|
|
